PNI AP800D gate automation kit, motor, photocells, remote control, lamp, 230 V, 1100 N and 800KG sliding gate

The PNI AP800D gate automation kit contains all the components necessary to automate a self-supporting gate: the motor, warning lamp, two photocells and mounting accessories. The motor has a power of 350 W and can open or close gates with a maximum weight of 800 kg.

Key features

• Motor for automatic sliding gates
• Power: 350 W
• Maximum door weight: 800 kg
• Opening/closing speed: 12 m/min
• Limit noise: ≤55 dBa
• Weatherproof
• Integrated control panel
• Pinion module: I-4
• Feeding: 230 V
• Remote control included: 2 pcs.
• Photocells included: 2 pcs.
• Warning lamp included
• Mounting accessories included
• Pier included: 2 pieces
• Obstacle detection with adjustable sensitivity (low to high)
• Photocells detect obstacles and stop the motor
• Automatic closing after 10, 30 or 60 seconds
• Condominium mode for simultaneous control from multiple access devices
• Remote control frequency: 433 MHz
• Remote control communication distance: up to 50 m
• Remote control battery: Alkaline, 23 A, 8 V
• Lamp feeding: 12-265 V
• Lamp power: 1.5 W
• Lamp size: 90 × 80 × 140 mm
• Photocell feeding: 12 / 24 V
• Photocell communication distance: up to 10 m
• Photocell size: 75 × 30 × 50 mm
• Wheel diameter: 680 mm
• Distance between wheels: 740 mm
• User manual included

Specifications

• Feeding: 230 V
• Power: 350 W
• Maximum door weight: 800 kg
• Opening/closing speed: 12 m/min
• Limit noise: ≤55 dBa
• Weatherproof: Yes
• Integrated control panel: Yes
• Pinion module: I-4
• Remote control battery: Alkaline, 23 A, 8 V
• Remote control communication distance: Up to 50 m
• Remote control frequency: 433 MHz
• Lamp feeding: 12-265 V
• Lamp power: 1.5 W
• Lamp size: 90 × 80 × 140 mm
• Photocell feeding: 12 / 24 V
• Photocell communication distance: Up to 10 m
• Photocell size: 75 × 30 × 50 mm
• Wheel diameter: 680 mm
• Distance between wheels: 740 mm
• User manual: Yes
• Motor: Yes
• Lamp: Yes
• Photocells: Yes, 2 pcs.
• Remote control: Yes, 2 pcs.
• Pier: Yes, 2 pieces
• Mounting accessories: Yes
• Package contents: motor, warning lamp, two photocells, mounting accessories, 2 remote controls, user manual
• Installation precautions: Do not perform welding when it is mounted on the bearing sets (the bearing contact is damaged); when the engine is mounted (it leads to the failure of the board and the wiring on it).
• Warnings in assembly: Do not perform welds when the motor is mounted (leads to the failure of the board and the wiring on it).
• Measurement weight: gross 10.8 kg, net 9.98 kg
• Measurement dimensions: product 25 × 18.5 × 27.7 cm, package 32 × 24.5 × 38.5 cm
• Measurement box: dimensions 32 × 24.5 × 38.5 cm, units 1, weight 10.84 kg