ROBITRONIC Shock Absorber Pits Holder V2 Red

This multifunctional shock absorber stand in red is primarily used as an aid for filling shock absorbers and is ideal for the 1/10 scale.

Consisting of 9 individual parts that plug into each other, the stand features a practical magnetic board measuring approximately 27mm x 84.5mm on the bottom to hold screws and split pins.

It offers 12 hole spaces to be filled, 4 additional rods for hanging springs, and 4 side-opening stands for extra space.

The upper level has four 18.4mm diameter holes, while the lower level features conical holes tapering from 17mm to 14.2mm.

Additional taper holes measuring 14.2mm to 12.5mm are drilled in the side stands.

• Shock absorber filling stand for 1/10 scale with magnetic board

The Robitronic shock absorber stand is an aid for filling shock absorbers, primarily for 1/10 scale.

The stand consists of 9 individual parts that plug together. A magnetic board on the bottom holds screws, split pins or similar parts. It has 12 holes and 4 additional rods for hanging items such as springs.

The four holes on the upper level have a diameter of 18.4 mm; its upper edge is approx. 96 mm above the floor. The holes on the lower level taper from 17 mm to 14.2 mm, and its upper edge is approx. 72 mm above the floor. Four stands that open at the sides provide additional space and have tapered holes measuring 14.2–12.5 mm.

• Specifications
• Thickness of the Plastic Parts: 3.5 mm
• Width of Wave-shaped Lateral Incisions on Upper Level: approx. 4 mm
• Magnetic Field: approx. 27 × 84.5 mm
• Dimensions (H × W × D): approx. 100 × 141 × 68 mm

In the box

• 1× Damper stand + magnetic board (without damper)
• Brand: Robitronic