PNI IP52LR wireless video surveillance camera package and PSF6020A photovoltaic solar panel

The PNI IP52LR is a 2 MP 1080P wireless video surveillance camera with outdoor and indoor IP and microSD slot, night mode, and APP CamHi. It is packaged with the PNI PSF6020A photovoltaic solar panel, power 60 W with 20 A battery included, 12 V output, for surveillance cameras.

Key features

• Remote control via phone or PC: the IP52LR camera is compatible with the CamHi app (Android/iOS) and the HiP2P app (Windows); based on the camera's IP, it can also be accessed via Internet Explorer. All remote control methods allow you to view images in real time, take snapshots, manually start and stop recording, and make network, video, or audio settings
• 2 MP H.264 Full HD 1920x1080: exceptionally clear images and H.264 video compression for increased storage efficiency; easy setup by scanning the QR code on the label or manually entering the camera UID; wireless connection
• Two-way communication: the integrated microphone and speaker allow you to communicate remotely with the visitor or scare away intruders; the recordings have both video and audio
• SD card recording: recordings can be saved locally on a micro SD card, with a maximum capacity of 128 GB (card not included); connected to a compatible NVR (for example PNI IP7516/IP716LR) recordings can be saved on a hard drive with a larger capacity; with a low-capacity micro SD card, it is recommended to activate recording only when motion is detected
• Actions in case of alarm: on motion detection the camera sends a notification to the mobile phone application; the recording can be sent to a server via FTP, to an email address or saved to the SD card
• Solar panel with rechargeable battery: the PNI PSF6020 60 W photovoltaic solar panel with 20 A battery can be installed in any location, even in isolated places where a stable power source is lacking; the built-in 20 A battery ensures the operation of a surveillance camera (not included) for up to 60 hours
• The monocrystalline solar panel with a maximum power of 60 W quickly charges the battery; the charge level is indicated by the central LED on the metal mounting bracket: below 25% the LED turns red and flashes, when fully charged it turns green and stays lit
• The solar panel should be installed where it gets the best possible exposure to the sun, oriented towards S or SW; the panel angle and direction must be adjusted according to the cardinal points for the most efficient capture of solar radiation
• Versatile pole or wall mounting: the solar panel has a multifunctional mounting bracket with accessories for wall mounting or mounting on a high pole; the camera support is also multifunctional, with several types of mounting for as many surveillance camera models as possible

Specifications

• Color: White / Black
• Image sensor: 1/2.8" CMOS
• Sensor resolution: 2 MP
• Resolution: 1080P (1920x1080)
• Lens type: 3.6 mm
• Minimum lighting: 0.01 Lux
• Viewing angle: 80°
• IR-Cut filter: Yes
• Image compression: H.264
• Frames per second: 30 FPS
• Video frequency: 50 Hz, 60 Hz
• Audio input: Integrated microphone
• Audio output: Integrated speaker
• Audio compression: G.711
• Ethernet: Yes, 10/100 Mbps RJ-45
• ONVIF: Yes
• LED: 18 LEDs
• Size: 192 × 70 × 70 mm
• Net weight: 340 grams
• SD card slot: MicroSD maximum 128 GB (card not included)
• Video recording: Locally on microSD card and remotely on PC or NVR
• IR distance: up to 20 m
• Send alarm notification to mobile phone: Yes
• Send alarm notification by email: Yes
• P2P: Yes
• Dedicated application: CAMH
• Supply voltage: 12 V / 1 A
• Solar panel: PNI PSF6020A, power 60 W with 20 A battery included, 12 V output, for surveillance cameras
• Package contains: Camera, Power, Wireless antenna, Ethernet cable (1 m long), Software CD, User manual
• Gross weight: 7.93 kg
• Net weight (package): 6.31 kg
• Product dimensions: 58 × 50 × 34.5 cm
• Package dimensions: 76 × 57 × 25 cm