FlySky Noble NB4+ 8-Kanal-Fernsteuerung mit FGr4B-Empfänger, 2,4 GHz AFHDS 3, 3,5 IPS-Touchscreen, USB-C, Dual-Akku (FS002P)

The FlySky Noble NB4+ is an 8-channel remote control for RC cars and boats, featuring the third generation 2.4 GHz AFHDS-3 protocol and including an FGr4B receiver. This transmitter features a 3.5-inch IPS touchscreen display with high contrast and brightness, an ergonomic design with a swivel steering wheel for right- and left-handed users, and a dual battery system consisting of a 1S 4300 mAh LiPo and a 3450 mAh 18650 battery. It provides an ultra-fast 2-channel mode for low latency, compatibility with all iBUS2 devices and select Hobbywing products, teacher-student functions, and a USB-C interface for charging and data connection.

Key features

• Swivel steering wheel; suitable for right- and left-handed use
• Dual battery system and intelligent RF configuration
• Low latency; use in simulations and other applications enabled by default
• Teacher-student function
• USB-C connection replaces the micro-USB port and supports trainer mode and connection of a head-tracking device

Specifications

• Frequency Protocol: AFHDS 3
• Channels: 8
• Suitable RC Models: Car, Boat
• Distance: >300 m (Ground)
• Low-Voltage Warning: < 3.65 V
• Antenna Type: External single antenna
• Charging Interface: USB-C
• Data Interface: USB-C
• Online Update: Yes
• Receiver: FGr4B
• PWM: 4
• Suitable Transmitters: All transmitters with AFHDS3 support
• Antenna Type: Single antenna
• Transmitter type: 2.4 GHz ISM
• Channel resolution: 4096
• Battery: 1S / (4.2 V) × 4300 mAh LiPo / 3450 mAh 18650 battery
• Display: 3.5 inch IPS touchscreen, resolution 320 × 480 px
• Temperature range: −10 °C to +60 °C
• Humidity range: 20% to 95%
• Transmitter dimensions: 131.41 × 115.95 × 190.56 mm
• Transmitter weight: 520 g
• Receiver voltage: 3.5–9 V
• Receiver data interface: PWM/PPM/i-BUS2/S.BUS/i-BUS
• Receiver dimensions: 17 × 29 × 16.6 mm
• Receiver weight: 6.4 g
• In the box: 1× FlySky "NB4+" transmitter, 1× receiver FGr4B and cable, 1× USB data cable, 1× handle shell (S, L), 1× springs (S, L), 1× replacement throttle lever, 2× transparent protective film, 1× manual